Agarwaal Electronics

The 12V /10W SMPS (HLK-10M12) Module, ultra-small series power supply module is a small volume, high efficiency power module designed for customers by Hi-Link. It has the advantage of global input voltage range, low temperature rise, low power consumption, high efficiency, high reliability, high security isolation etc. and has been widely used in smart home,automation control, communication equipment, instruments and other industries.

 Specification:

• Ultra-thin, ultra-small, minimum volume in the industry
• Universal input voltage (90~245Vac)
• Low power consumption, environmental protection, no-load loss <0.1W
• low ripple and low noise
• Good output short circuit and over-current protection and self-recovery
• High efficiency, high power density
• Input-output isolated voltage-proof 3000Vac
• 100% full load aging and testing
• High reliability, long life design, continuous working time more than 100000 hours
• Meet UL,CE requirements; product design meets EMC and safety test requirements
• Adopt high quality environmental protection waterproof heat conduction glue to fill seal,moisture-proof, anti- vibration, meet the IP65 standard of waterproof and dust proof
• Economic solution, cost-effective

 Features:

• Model Number: HLK-10M12
• Output Power: 10W
• Output Type: Single
• Input Voltage: 90-245VAC
• Output Voltage: 12VDC
• Output Current: 830mA

 Pacakge Includes:

• 1x HLK 10M12 SMPS Module (Hi-Link)

 

Overview

12V/20W SMPS (HLK-20M12) Module (Hi-Link) is a small volume, plastic enclosed PCB mounted, isolated switching step-down high-efficiency power module,  designed by Hi-Link. It has been widely used in smart homes, automation control and other industries.

It can supply 12V DC from 100 ~ 240V AC and has a power rating of 20 Watt. This makes it perfect for small projects that need a 12V supply from mains. There are many advantages to these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation etc.

This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take.

Features:

• Meet UL, CE requirements
• Ultra-thin, ultra-small
• Rated Input Voltage: 100-240 VAc
• Low ripple and low noise
• Output overload and short circuit protection
• High efficiency, high power density
• The product is designed to meet the requirements of the EMC and Safety Test
• Low power consumption, environmental protection, no-load loss <0.1W

 Specifications:

• Model Number: HLK-20M12
• Output Power(W): 20 W
• Output Type: Single
• Input Voltage(V): 100-240 VAc
• Output Voltage(V): 12 VDc
• Output Current(mA): 1600 mA

 Environmental conditions:

• Technical indicators: Single bit
• Working temperature: -25—+60 C
• Storage temperature:  -40—+80 C
• Relative humidity: 5-95%
• Cooling way: Natural cooling
• Atmospheric pressure: 80-106Kpa
• Altitude: 2000M or less

Overview

5V /20W SMPS (HLK-20M05) Module is a small volume, plastic enclosed PCB mounted, isolated switching step-down high-efficiency power module,  designed by Hi-Link. It has been widely used in smart homes, automation control and other industries.

It can supply 5V DC from 100 ~ 240V AC and has a power rating of 20 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. There are many advantages to these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation etc.

This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take.

Features:

• Meet UL, CE requirements
• Ultra-thin, ultra-small
• Rated Input voltage (AC: 100 ~ 240V)
• Low ripple and low noise
• Output overload and short circuit protection
• High efficiency, high power density
• The product is designed to meet the requirements of the EMC and Safety Test
• Low power consumption, environmental protection, no-load loss <0.1W

Specifications:

• Model Number: HLK-20M05
• Output Power(W): 20
• Output Type: Single
• Input Voltage(V): 100-240VAC
• Output Voltage(V): 5V
• Output Current(mA): 4000mA
• Working Temp(C): -25 +60
• Working Humidity: 5-95

Environmental conditions:

• Technical indicators: Single bit
• Working temperature: 20-60 +degree
• Storage temperature: + 80-40 -degree
• Relative humidity: 5-95%
• Cooling way: Natural cooling
• Atmospheric pressure: 80-106Kpa
• Altitude: 2000M or less

Pacakge Includes:

• 1x 5V / 20W SMPS Module (HLK-20M05)

 

Documents/ Downloads: 

• Datasheet

5V / 5W SMPS Module from Hi-Link is a PCB mounted plastic enclosed isolated switching step down power supply module. It can supply 5V Dc from 120V -230V AC and has a power rating of 5W. Its ultra compact size makes it perfect to use in places where size is a constraint. This power supply module replaces lots of parts from the traditional power supply like diodes, voltage regulator and transformers.There are many advantages for these modules such as low temperature rise, low power, high efficiency, high reliability, high security isolation etc. It is widely used in smart home, automation and control, communication equipment, instrumentation and other industries.

Specifications of 5V / 5W SMPS Module:

•     Input voltage :90-240V AC
•     Low ripple and low noise
•     Output overload and short circuit protection
•     High efficiency, high power density
•     Low power consumption, environmental protection, no-load loss <0.1W
•     100% load aging and testing
•     Operation Temperature : -20 — +60
•     Store Temperature : -40 — +80
•     Relative humidity : 5 — 95 %
•     Cooling way by radiation   
•     Atmospheric pressure : 80—106 Kpa
•     Sea level elevation : 2000 m
•     Rated input voltage : 100-240 VAc
•     Input voltage range : 90-264 VAc
•     Meets UL and  CE requirements
•     Ultra-thin and ultra-small

Dimensions:

•     Weight : 40g
•     Size : 38 * 23 * 18 mm

This is a LOW Level 5V 4-channel relay interface board, and each channel needsa15-20mA driver current. It can be used to control various appliances andequipmentwith large current. It is equipped with high-current relays that work under AC250V10A or DC30V 10A. It has a standard interface that can be controlleddirectlybymicro-controller. 

A 5V 2-channel relay module is an electronic circuit board that uses two relays to control two separate electrical circuits, typically with a 5V DC power supply. These modules are commonly used to interface microcontrollers (like Arduino, Raspberry Pi, etc.) with higher voltage and current devices that require switching, such as motors, solenoids, or lights.

A 5V 8-channel relay module is an electronic device that allows a low-voltage (5V) microcontroller or other control circuit to switch higher voltage or current loads, such as AC or DC appliances. It features eight individual relays, each with its own set of contacts (normally open and normally closed) allowing for independent control of eight different circuits.