Agarwaal Electronics

Battery: 18650 12.6v Battery pack Capacity: As per selection Battery Type: Rechargeable Li-on battery. Input Voltage: 12.6 V Output voltage: 11.1 - 12.6v DC Output Current: About 1-3A Product's life: charge and discharge circulation over 1000 Basic Information - Cell count: 3 - Cell type: 18650 - Configuration: 3 sets in series 1 sets in parallel(3S1P) Built-in BMS protection,With overcharge, over discharge, short circuit protection - Pack: Brick,Blue PVC - Width: 20mm - Height: 68mm - Length: 55mm * Manual measurement, there will be deviations. Energy - Nominal Voltage: 11.1V - Output Voltage Range: 11.1v - 12.6 by test conditions (eg, temperature, wire loss, test equipment, test parameters, etc.), please perform multiple tests and take the average of the results to reduce the deviation. At a temperature of 25 ° C, the deviation between the pure resistance discharge test result and the nominal data is controlled within ±10%, which is normal. Charging - Charge mode: CC CV - Use a S Lithium-ion battery dedicated charger to charge up to 8.4v - Charge current 2A max Discharge - Continuous discharge current 5A - Instantaneous discharge current 7A

18650 3.7V 2000mAh Li-ion Lithium-Ion Rechargeable Battery is a Li-ion rechargeable battery with 2000mAh Battery. This is not a standard AA or AAA battery but is very useful for applications which require continuous high current or high current in short bursts like in cameras, DVD players, iPod, etc. A 18650 cell can be charged and discharged up to 1000 cycles without much loss in battery capacity. They are safe to use, environment friendly and has a long battery life. It comes with high energy density and provides excellent continuous power sources to your device. It should be used with a protection circuit board which guards the battery against over-charge, over-discharge of the pack, and avoid over-current drawn.

This 18650 Lithium ion Battery Holder is a high-quality Lithium battery holder that can hold four 18650 Lithium batteries. It's a space-saving battery holder with built-in PCB protective circuits for securing rechargeable 18650 Lithium-Ion Cells with increased energy density and reduced weight.

This Lithium ion Battery Holder is designed for 3.7-volt, high-energy, low-weight mobile electronics, industrial, and telecommunications applications that require circuit protection to prevent battery damage.

This is a black plastic holder designed to hold one 18650 electric cell which are internally connected in series to form an 3.7V battery. The holder is equipped with wires which can be directly connected to our devices which we need to supply power with.

The 18650 2 Cell Battery Holder is designed to securely hold two 18650 lithium-ion batteries. It ensures safe connections and easy integration into various electronics projects requiring a 7.4V power supply.

This is a 3x battery cell holder for rechargeable 18650 Lithium-Ion Cells. These battery-holders are used to add three lithium cells and have clearly marked with polarity identification to assure proper orientation.

The Li-ion 2 Cell Battery Charger Universal AC with wire is a lightweight and compact charging solution for 3.7V Li-ion batteries. Its universal AC input makes it convenient for use in different voltage standards across the world. With its fast and efficient charging performance, this charger is an excellent choice for travellers or anyone needing to charge their batteries on-the-go.

This charger can only charge a single Li-ion battery. This charger is built for different types, and different sizes, rechargeable Li-ion batteries. It is a smart charger, it stops working when the battery is fully charged. This device also has Overheat and Overcurrent protection. The connector plug is compatible with common household slots. The charging time is approximately 8 to 10 hours. This is a long-lasting device that can charge more than 1000 batteries.

The TP4056 is a popular, low-cost, single-cell lithium-ion battery charging module. It's widely used in electronic devices and DIY projects due to its simplicity, efficiency, and affordability. It utilizes the TP4056 IC for charging and the DW01 IC for battery protection.